Zte ZXR10 2910E-PS Configuration Manual page 20

Zxr10 2900e series easy-maintenance secure switch
Hide thumbs Also See for ZXR10 2910E-PS:
Table of Contents

Advertisement

ZXR10 2900E Series Configuration Guide
Configuration through SNMP Connection
SNMP (Simple Network Management Protocol) is the most popular network management
protocol at present. With this protocol, all devices in the network can be managed by a
network management server.
SNMP applies the management mode of server/client end.
management server serves as the SNMP server. The front-end network device serves as
the SNMP client. The front end and back end share one MIB management database and
communicate with each other through the SNMP protocol.
The back-end network management server must be installed with the network
management software supporting the SNMP protocol. The switch is configured and
managed by the network management software. For the detailed configuration of SNMP
on ZXR10 2900E series switches, refer to the section of "SNMP".
Configuration through WEB Connection
Web is another way to implement remote switches management and is similar to Telnet.
A user can log in to a remote switch through the Ethernet port of the local host. The login
username, login password and administrator password must be configured on the switch
and the Web function must be enabled. Also the IP address of the layer-3 port on the switch
can be successfully pinged through on the local host (For configuration of IP address of
the layer-3 port, refer to Layer 3 Configuration).
1. Create a new management user
create user <name>{admin | guest}[<0-15>]
user <name>: the length cannot exceed 15 characters.
2. Configure login password
set user local <name> login-password <string>
login-password <string>: the length cannot exceed 16 characters.
3. Configure administrator password
set user {local|radius}<name> admin-password <string>
admin-password <string>: the length cannot exceed 16 characters.
4. Enable web network management function (by default, this function is disabled) and
set listening port.
set web enable
set web listen-port < 80,1025-49151 >
SJ-20120409144109-002|2012-07-02(R1.0)
2-6
ZTE Proprietary and Confidential
The back-end network

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents