Zte ZXR10 2910E-PS Configuration Manual page 155

Note:
1. The intersecting node of the primary ring and the Smart Link node must set as
Edge-Master or Edge-Transit.
2. The port connecting the primary port and Smart Link must set as Access-Port.
3. The Smart Link can be used with the hierarchical ring at the same time.
Cross-Device TCN Sending Example
l
Configuration Description
As shown in
The devices are connected to devices of another vender. It is required to enable STP.
When the link is changed over, SW-1 is responsible for sending TCN to inform the
uplink devices to clear the MAC entities.
SJ-20120409144109-002|2012-07-02(R1.0)
Figure 4-44, configure ZESS on the ZTE devices from SW-1 or SW-6.
4-109
Chapter 4 Service Configuration
ZTE Proprietary and Confidential