Zte ZXR10 2910E-PS Configuration Manual page 64

ZXR10 2900E Series Configuration Guide
The ZXR10 2900E supports up to 15 aggregation groups. In each aggregation group, the
number of aggregated links does not exceed eight. Aggregated links must have the same
transmission media type and transmission rate.
Configuring LACP
The LACP configuration includes the following commands:
Command
zte(cfg)#set trunk <trunklist> pvid <1-4094>
zte(cfg)#set lacp {enable | disable}
zte(cfg)#set lacp aggregator <1-15>{add | delete} port <portlist>
zte(cfg)#set lacp aggregator <1-15> mode {dynamic | static | mixed }
zte(cfg)#set lacp port <portlist> mode {active | passive}
zte(cfg)#set lacp port <portlist> timeout {long | short}
zte(cfg)#set lacp priority <1-65535>
zte(cfg)#set lacp load-balance {port | packet {L2 | L3 | L4}}
show trunk (all configuration modes)
show trunk [<trunklist>] (all configuration modes)
show trunk <trunklist> vlan (all configuration modes)
show lacp (all configuration modes)
show lacp aggregator (all configuration modes)
show lacp aggregator <1-15> (all configuration modes)
show lacp port (all configuration modes)
show lacp port [<portlist >] (all configuration modes)
SJ-20120409144109-002|2012-07-02(R1.0)
Function
Sets the default trunk VID.
Enables or disables the LACP function.
Adds or deletes a specified port to/from
an LACP aggregation group.
Sets aggregation mode of an LACP
aggregation group.
Sets the mode used by the port to
participate in the aggregation.
Sets the timeout information of the port
participating in the aggregation.
Sets the priority of LACP.
Sets LACP load balance mode.
Displays the PVIDs of all trunks
and unregistered multicast filtering
configuration.
Displays the trunk PVID and
unregistered multicast filtering
configuration.
Displays the VLAN configuration of
trunk.
Displays the LACP global configuration
information.
Displays all LACP aggregation groups
brief information.
Displays independent LACP
aggregation group detailed status
information.
Displays aggregation status information
of all the LACP member ports.
Displays LACP member port
aggregation status information.
4-18
ZTE Proprietary and Confidential