Zte ZXR10 2910E-PS Configuration Manual page 39

download succeeds (even if one file is downloaded successfully), the automatic download
flag in the NVRAM is cleared and the switch is restarted.
For the relation between the files transferred by the DHCP server and the triggered
download operations, refer to the table below:
Name
zImage
config.dat
startrun.dat
*.dat
config.dat@zImage
startrun.dat@zImage
*.dat@zImage
*.dat, wherein, "*" is a wild card indicating a device type. This means the configuration file
automatically adapts in accordance with the device type.
The name of the file to be downloaded is a character string configured on the DHCP server,
and it cannot be modified locally.
By executing the show dhcp command, you can see the configuration file to be downloaded
to the current device, for example, the ZXR10_2928E.dat file downloaded from the TFTP
server to the ZXR10 2928E device.
The following table lists the complete adaption relation:
ID
1
2
3
4
5
6
zte(cfg)#show dhcp
DHCP download flag is disabled, config file is found.
DHCP download will not startup, when system reboot.
DHCP config file(option-67) *.dat will be translated to ZXR10_2928E.dat.
DHCP snooping-and-option82 is disabled.
DHCP client is enabled.
DHCP client broadcast-flag is enabled.
SJ-20120409144109-002|2012-07-02(R1.0)
Whether to Download the
Version File
Yes
No
No
No
Yes
Yes
Yes
Device
ZXR10 2910E-PS
ZXR10 2918E-PS
ZXR10 2918E
ZXR10 2928E-PS
ZXR10 2928E
ZXR10 2952E
3-9
Chapter 3 System Management
Whether to Download
Configuration
No
Yes
Yes
Yes
Yes
Yes
Yes
Configuration File Name
ZXR10_2910E-PS.dat
ZXR10_2918E-PS.dat
ZXR10_2918E.dat
ZXR10_2928E-PS.dat
ZXR10_2928E.dat
ZXR10_2952E.dat
ZTE Proprietary and Confidential