Zte ZXR10 2910E-PS Configuration Manual page 118

ZXR10 2900E Series Configuration Guide
Command
zte(cfg-nas)#radius isp <ispname> client <A.B.C.D>
zte(cfg-nas)#radius isp <ispname> sharedsecret <string>
zte(cfg-nas)#radius isp <ispname> fullaccount {enable | disable}
zte(cfg-nas)#radius isp <ispname> defaultisp {enable | disable}
zte(cfg-nas)#radius isp <ispname> description <string>
zte(cfg-nas)#radius nasname <nasname>
zte(cfg-nas)#radius delimiter <ispdelimiter>
zte(cfg-nas)#radius keep-time <0-4294967295>
zte(cfg-nas)#radius timeout <1-255>
zte(cfg-nas)#radius retransmit <1-255>
zte(cfg-nas)#clear accounting-stop {session-id <session-id>| user-name
<user-name>| isp-name <isp-name>| server-ip <A.B.C.D>}
show radius [ispname <ispname>] (all configuration modes)
show radius accounting-stop [{ session-id <session-id>| user-name
<user-name>| isp-name <isp-name>| server-ip <A.B.C.D>}] (all
configuration modes)
Access Service Configuration Instance
l
Configuration Description
As shown in
connects the radius server and the user's PC through the network cable. The user
can log in to the switch through the console port and configure the access server, and
then enable client software on user PC to originate authentication request.
SJ-20120409144109-002|2012-07-02(R1.0)
Figure 4-23, the user installs radius client terminal in PC. The switch
4-72
Function
Sets RADIUS client end address.
Sets the shared password of ISP
domain (public key).
Sets or deletes the full account of the
domain.
This specifies a default domain.
Sets the domain description.
Sets the NAS server name.
Sets Radius authentication domain
name delimiter.
Sets keep time of radius accounting
breaking packet.
Sets the server response time-out time.
Sets the number of retransmissions
upon server response time-out.
Deletes the radius accounting-stop
packet which is failed to send.
Displays radius configuration
information.
Displays the RADIUS accounting
packet which fails to be sent.
ZTE Proprietary and Confidential