Zte ZXR10 2910E-PS Configuration Manual page 210

ZXR10 2900E Series Configuration Guide
SNMP Configuration Instance1
l Configuration Description
Suppose that the IP address of the network management server is 10.40.92.105,
the switch has a layer-3 port with the IP address of 10.40.92.200, and the switch
is managed through the network management server.
Create a community named "zte" with the read/write authority and the view named
"vvv", and then associate the community "zte" with the view "vvv". Specify the IP
address of the host receiving traps as 10.40.92.105, and the community as "zte".
l
Network
DTU device is directly connected with network management server PC.
l
Configuration Procedure
zte(cfg)#config router
zte(cfg-router)#set ipport 0 ipaddress 10.40.92.200 255.255.255.0
zte(cfg-router)#set ipport 0 vlan 2
zte(cfg-router)#set ipport 0 enable
zte(cfg-router)#exit
zte(cfg)#config snmp
zte(cfg-snmp)#create community zte private
zte(cfg-snmp)#create view vvv
zte(cfg-snmp)#set community zte view vvv
zte(cfg-snmp)#set host 10.40.92.105 trap v2 zte
zte(cfg-snmp)#show snmp community
CommunityName
-------------- -------
zte
zte(cfg-snmp)#show snmp view
ViewName
--------- -------- ------------------------
vvv
zte(cfg-snmp)#show snmp host
HostIpAddress
-------------- ---------- ------- ------ -------------
10.40.92.105
SNMP Configuration Instance2
l Configuration Description
SJ-20120409144109-002|2012-07-02(R1.0)
Level ViewName
------------ ---
private vvv
Exc/Inc MibFamily
Include 1.3.6.1
Comm/User Version type
zte Ver.2c
5-10
Acl
-
SecurityLevel
Trap
ZTE Proprietary and Confidential