Zte ZXR10 2910E-PS Configuration Manual page 116

ZXR10 2900E Series Configuration Guide
Command
zte(cfg-nas)#dot1x re-authenticate {enable | disable}
zte(cfg-nas)#dot1x re-authenticate period <1-4294967295>
zte(cfg-nas)#dot1x quiet-period <0-65535>
zte(cfg-nas)#dot1x tx-period <1-65535>
zte(cfg-nas)#dot1x supplicant-timeout <1-65535>
zte(cfg-nas)#dot1x server-timeout <1-65535>
zte(cfg-nas)#dot1x max-request <1-10>
zte(cfg-nas)#dot1x add vlan <1-4094>[mac <HH.HH.HH.HH.HH.HH>]
zte(cfg-nas)#dot1x delete vlan <1-4094>
zte(cfg-nas)#clear client
zte(cfg-nas)#clear client index <0-255>
zte(cfg-nas)#clear client {port <portlist>| vlan <vlanlist>}
show dot1x (all configuration modes)
show client (all configuration modes)
show client index <0-255> (all configuration modes)
SJ-20120409144109-002|2012-07-02(R1.0)
Function
Enables or disables re-authentication
function.
Sets the time interval of
re-authentication.
Sets quiet period of authentication.
Sets the time that the authentication
system needs to wait before it can
retransmit the EAPOL data packet
because it does not receive the
response from the client.
Sets the time-out time for the
authentication system to receive the
data packets from the authentication
client system.
Sets the time-out time for the
authentication system to receive the
data packets from the authentication
server.
Sets the maximum times of request
retransmitting when the timer expires
before the authentication system
receives the Challenge response from
the client.
Sets the private MAC address that
DOT1X protocol can use.
Deletes the private MAC address that
DOT1X protocol can use.
Deletes all clients.
Clears the specified client.
Deletes the client end user of specified
port/VLAN.
Displays 802.1x configuration
information.
Displays the information of all access
users.
Displays the information of an accessing
users
4-70
ZTE Proprietary and Confidential