Zte ZXR10 2910E-PS Configuration Manual page 24

ZXR10 2900E Series Configuration Guide
zte(cfg)#config ingress-acl link number 200
zte(ingress-link-acl)#
In the layer-2 ingress ACL configuration mode, you can add, delete and move the rules of
layer-2 ingress ACL with specific ACL number.
To return to the global configuration mode from layer-2 ingress ACL configuration mode,
use the command exit or press <Ctrl+Z>.
Hybrid Ingress ACL Configuration Mode
In the global configuration mode, use the command config ingress-acl hybrid number <30
0-399> to enter hybrid ingress ACL configuration mode, as shown below:
zte(cfg)#config ingress-acl hybrid number 333
zte(ingress-hybrid-acl)#
In the hybrid ingress ACL configuration mode, you can add, delete and move the rules of
hybrid ingress ACL with specific ACL number.
To return to the global configuration mode from hybrid ingress ACL configuration mode,
use the command exit or press <Ctrl+Z>.
Global Ingress ACL Configuration Mode
In the global configuration mode, use the command config ingress-acl global to enter global
ingress ACL configuration mode, as shown below:
zte(cfg)#config ingress-acl global
zte(ingress-global-acl)#
In the global ingress ACL configuration mode, you can add, delete and move the rules of
global ingress ACL with specific ACL number.
To return to the global configuration mode from global ingress ACL configuration mode,
use the command exit or press <Ctrl+Z>.
Basic Egress ACL Configuration Mode
In the global configuration mode, use the command config egress-acl basic number <400-4
99> to enter the basic egress ACL configuration mode, as shown below:
zte(cfg)#config egress-acl basic number 400
zte(egress-basic-acl)#
In the basic egress ACL configuration mode, you can add, delete and move the rules of
basic egress ACL with specific ACL number .
To return to the global configuration mode from basic egress ACL configuration mode, use
the command exit or press <Ctrl+Z>.
Extended Egress ACL Configuration Mode
In the global configuration mode, use the command config egress-acl extend number <500-
599> to enter extended egress ACL configuration mode, as shown below:
2-10
SJ-20120409144109-002|2012-07-02(R1.0) ZTE Proprietary and Confidential