Figure 4-51 Single Port Loop Detection Configuration Topology; Figure 4-52 Double Ports Loop Detection Configuration Topology - Zte ZXR10 2910E-PS Configuration Manual

ZXR10 2900E Series Configuration Guide

Figure 4-51 Single Port Loop Detection Configuration Topology

l
Configuration Procedure
zte(cfg)#set loopdetect port 1 enable
l Configuration Verification
Check the loop detection state of Switch 2:
zte(cfg)#show loopdetect
The block-delay of loopdetect
The packet interval of loopdetect : 15
PortId
------
1
zte(cfg)#show loopdetect port 1
PortId : 1
VlanId
------
1
Double Ports Loop Detection Configuration Instance
l
Configuration Description
As shown in
loop-detect of switch2 to suppressing broadcast storm of network under switch2.

Figure 4-52 Double Ports Loop Detection Configuration Topology

l
Configuration Procedure
Switch2(cfg)#set loopdetect port 1,2 enable
Switch2(cfg)#set loopdetect extend port 1 enable
l
Configuration Verification
Check the loop detection state of switch2
SJ-20120409144109-002|2012-07-02(R1.0)
isUp isStp isProtect
---- ----- ---------
Up No Yes
isLoop isBlock
------ -------
Yes Yes
Figure 4-52, configure the double ports loop detection function of
: 5 (min)
(sec)
isExtend loopVlanNum
-------- -----------
No 1
4-130
ZTE Proprietary and Confidential
loopType
---------
Port