Zte ZXR10 2910E-PS Configuration Manual page 67

table, instead of all ports. This restricts the wide spread of multicast messages in the LAN
switch, reduces the waste of network bandwidth, and improves the utilization rate of the
switch.
Configuring IGMP Snooping
The IGMP Snooping configuration includes the following commands:
Command
zte(cfg)#set igmp snooping {enable | disable}
zte(cfg)#set igmp snooping {add | delete} vlan <vlanlist>
zte(cfg)#set igmp snooping {add | delete} maxnum <1-1024>{vlan
<vlanlist>| port <portlist>}
zte(cfg)#set igmp snooping monitor-ring {enable | disable}
zte(cfg)#set igmp snooping vlan <1-4094>{add | delete} group
<A.B.C.D>[port <portlist>| trunk <trunklist>]
zte(cfg)#set igmp snooping vlan <1-4094>{add | delete} smr {port <portlist>|
trunk <trunklist>}
zte(cfg)#set igmp snooping private-group {<A.B.C.D>| enable | disable}
zte(cfg)#set igmp snooping timeout <100-2147483647>{host | router}
zte(cfg)#set igmp snooping query-interval <10-2147483647>
zte(cfg)#set igmp snooping response-interval <10-250>
zte(cfg)#set igmp snooping last-member-query <10-250>
zte(cfg)#set igmp snooping query vlan <vlanlist>{enable | disable}
zte(cfg)#set igmp snooping query version {v2 | v3}
zte(cfg)#set igmp snooping fastleave {enable | disable}
zte(cfg)#set igmp snooping v3 {enable | disable}
zte(cfg)#set igmp snooping proxy version {v2 | auto}
SJ-20120409144109-002|2012-07-02(R1.0)
Chapter 4 Service Configuration
Function
Enables or disables the IGMP Snooping
function.
Adds or deletes the IGMP Snooping
function to/from a specified VLAN.
Sets or clears the maximum multicast
group number on the specified
VLAN/port.
Enables or disables the IGMP ring
monitoring function.
Adds or deletes static multicast group
based on VLAN.
Adds or deletes routing port or trunk on
the specified VLAN.
Adds private multicast group and
enables or disables private multicast
group function.
Sets multicast member or route
time-out.
Sets the snooping interval.
Sets the snooping response interval.
Sets the snooping interval of last
member.
Enables or disables the query function
on the specified VLAN.
Sets the IGMP version of the query
packet sent by switch.
Enables or disables fast leave function.
Enables or disables IGMP V3 function.
Sets the version of the query message
that the switch responses to the router.
4-21
ZTE Proprietary and Confidential