Zte ZXR10 2910E-PS Configuration Manual page 218

ZXR10 2900E Series Configuration Guide
Command
zte(cfg-group)#set ztp portdelay <1-100>
zte(cfg-group)#set ztp hopdelay <1-1000>
zte(cfg-group)#ztp start
show ztp (all configuration modes)
show ztp device [<idlist>](all configuration modes)
show ztp topology (all configuration modes)
show ztp mac <HH.HH.HH.HH.HH.HH> (all configuration modes)
zte(cfg-group)#set group commander ipport <0-63>[ip-pool
<A.B.C.D/M>]
zte(cfg-group)#set group candidate
zte(cfg-group)#set group independent
zte(cfg-group)#set group add {mac <HH.HH.HH.HH.HH.HH>[<1-
255>]| device <idlist>}
zte(cfg-group)#set group delete member <idlist>
zte(cfg-group)#set group handtime <1-300>
zte(cfg-group)#set group holdtime <1-300>
zte(cfg-group)#set group name <name>
zte(cfg-group)#set group mac-mode {standard | extend [mac
<HH.HH.HH.HH.HH.HH>]}
zte(cfg-group)#set group syslogsvr <A.B.C.D>
SJ-20120409144109-002|2012-07-02(R1.0)
5-18
ZTE Proprietary and Confidential
Function
Sets the port delay for forwarding
topology requests.
Sets the hop delay for forwarding
topology requests.
Starts collecting topology
information.
Displays ZTP configuration.
Displays the configuration
information of ZTP according to
the device ID.
Displays network topology by
simple graph.
Displays detail information of
specified device according to MAC
address.
Sets a command switch, specifies
a layer-3 port number for cluster
management and sets IP address
pool for user cluster management.
Sets a switch as candidate switch.
Sets a switch as independent
switch.
Adds a device with specified
member ID from cluster.
Deletes a device with specified
member ID from cluster.
Sets a time interval for handshake
between command switch and
member switch.
Sets effective holding time of
information about switches in
cluster.
Sets cluster name.
Sets the protocol broadcast
address mode of cluster
management as standard mode.
Sets IP address of internal public
SYSLOG Server of cluster.