Zte ZXR10 2910E-PS Configuration Manual page 31

Chapter 3
System Management
Table of Contents
File System Operation ................................................................................................3-1
Configuring the TFTP Server......................................................................................3-3
Configuring the FTP Server ........................................................................................3-5
Importing and Exporting Configuration........................................................................3-7
Backing Up and Recovering Files...............................................................................3-7
Downloading Software Version Automatically .............................................................3-8
Configuring Automatic Saving of a Configuration File ...............................................3-10
Software Version Upgrade........................................................................................3-11
File System Configuration Commands......................................................................3-15
3.1 File System Operation
In the ZXR10 2900E, the FLASH memory is the major storage device. Both the version
file and configuration file of the switch are saved in the FLASH memory. Operations, such
as version upgrade and configuration saving, should be conducted in the FLASH memory.
l
The name of the version file is zImage. By default, it is saved in the /img directory.
l
The name of configuration file is startrun.dat. By default, it is saved in the /cfg
directory.
Directory Operation
The directory can be created and deleted. The current working directory, the file of the
specified directory can be viewed.
Configure directory operation at global mode.
Ste-
Command
p
1 zte(cfg)#config tffs
2 zte(cfg-tffs)#md <directory name>
3 zte(cfg-tffs)#rename <file-name> <file-name>
4 zte(cfg-tffs)#cd <directory name>
5 zte(cfg-tffs)#ls
SJ-20120409144109-002|2012-07-02(R1.0)
3-1
ZTE Proprietary and Confidential
Function
Enters file system configuration
mode.
Creates a directory.
Modifies the directory name.
Changes the current directory,
and opens this directory.
Lists the current directories.