Zte ZXR10 2910E-PS Configuration Manual page 98

ZXR10 2900E Series Configuration Guide
Command
zte(cfg)#set qos traffic-limit fe-port <1-24>{data-rate <0-100000>| disable}
zte(cfg)#set qos traffic-limit fe-port <1-24>{packet-rate
<0-148810>[packet-lenth <64-10240>]| disable}
zte(cfg)#set qos traffic-limit fe-port <1-24> packet-type {broadcast |
known-uc | multicast | tcp-syn | unknown-uc}{enable | disable}
zte(cfg)#set qos traffic-limit fe-port <1-24> protect {enable|disable}
zte(cfg)#set qos traffic-limit fe-port <1-24> protect time <1-10>
zte(cfg)#set qos traffic-limit ge-port <25-28>{data-rate <0-1000000>|
disable}
zte(cfg)#set qos traffic-limit ge-port <25-28>{packet-rate
<0-1488100>[packet-lenth <64-10240>]| disable}
zte(cfg)#set qos traffic-limit ge-port <25-28> packet-type {broadcast |
known-uc | multicast | tcp-syn | unknown-uc}{enable | disable}
zte(cfg)#set qos traffic-limit ge-port <25-28> protect {enable|disable}
zte(cfg)#set qos traffic-limit ge-port <25-28> protect time <1-10>
zte(cfg)#set qos traffic-limit xge-port <2/1-2/4>{data-rate <0-10000000>|
disable}
zte(cfg)#set qos traffic-limit ge-port <2/1-2/4>{packet-rate
<0-14881000>[packet-lenth <64-10240>]| disable}
zte(cfg)#set qos traffic-limit xge-port <2/1-2/4> packet-type {broadcast |
known-uc | multicast | tcp-syn | unknown-uc}{enable | disable}
zte(cfg)#set qos traffic-shaping fe-port <1-24>{data-rate <32-100000>
burst-size <8-4094>| disable}
zte(cfg)#set qos traffic-shaping fe-port <1-24> queue <1-7>{data-rate
<32-100000> burst-size <8-4094>| disable}
zte(cfg)#set qos traffic-shaping ge-port <25-28>{data-rate <2-1000>
burst-size <8-4094>| disable}
SJ-20120409144109-002|2012-07-02(R1.0)
Function
Sets 100 M port ingress rate limit, in
which <0-100000> is the maximum of
data transmission rate.
Sets 100 M port ingress rate limit, in
which <0-148810> is the maximum of
packet transmission rate.
Sets the packet type that rate limit
function limits.
Sets the port rate limiting function.
Sets the port shutdown time when the
port rate limit function is enabled.
Sets 1000 M port ingress rate limit, in
which, <0-100000> is the maximum of
data transmission rate.
Sets 1000 M port ingress rate limit, in
which, <0-148810> is the maximum of
packet transmission rate.
Sets the packet type that rate limit
function limits.
Sets the ingress rate limiting function
for the 1000 M port.
Sets the port shutdown time when the
port rate limit function is enabled.
Sets the ingress rate limit for the 10000
M port, in which, <0-100000> is the
maximum of data transmission rate
Sets the ingress rate limit for the 10000
M port, in which, <0-148810> is the
maximum of packet transmission rate.
Sets the message type restricted by the
rate limit function.
Sets 100M egress shaping rate.
Sets 100M egress shaping rate based
on queue.
Sets 1000M egress shaping rate.
4-52
ZTE Proprietary and Confidential