Zte ZXR10 2910E-PS Configuration Manual page 68

ZXR10 2900E Series Configuration Guide
Command
zte(cfg)#set igmp snooping crossvlan {enable | disable}
zte(cfg)#set igmp filter {enable | disable}
zte(cfg)#set igmp filter {add | delete} groupip <A.B.C.D.> vlan <vlanlist>
zte(cfg)#set igmp filter {add | delete} sourceip <A.B.C.D.> vlan <vlanlist>
show igmp snooping (global configuration modes)
show igmp snooping vlan [<1-4094>[host | route]] (global configuration
modes)
show igmp snooping port [<portlist>] (global configuration modes)
show igmp snooping v3 {port <1-28>| trunk <1-15>} (global configuration
modes)
show igmp filter (global configuration modes)
show igmp filter vlan <1-4094> (global configuration modes)
zte(cfg)#set igmp filter {add | delete} grouplist <A.B.C.D.> mask
<A.B.C.D.> vlan <vlanlist>
zte(cfg)#set igmp snooping multicast-ring {enable | disable}
zte(cfg)#set igmp snooping multicast-ring {add | delete} cascade port
<portlist>
IGMP Snooping Configuration Instance
l
Configuration Description
As shown in
connected to the router, add ports 10, 1, 3, and 5 to VLAN200, and users on ports 1,
3, and 5 send multicast join request packets with multicast addresses 230.44.45.167
and 230.44.45.157 respectively. Add multicast filter group address 230.44.45.167 on
VLAN200. The IGMP Snooping function and IGMP Filter function are enabled and
the snooping results are displayed.
SJ-20120409144109-002|2012-07-02(R1.0)
Figure 4-5, ports 1, 3, and 5 are connected to the host, port 10 is
4-22
Function
Enables or disables switch cross-VLAN
function.
Enables or disables filtering function.
Adds or deletes the filtering of group in
the specified VLAN.
Adds or deletes the filtering of source in
the specified VLAN.
Displays IGMP Snooping global
configuration information.
Displays the configuration of IGMP
snooping result.
Displays port maximum multicast group
number and current multicast group
number.
Displays the v3 multicast snooping
results of the port or trunk.
Displays the configuration of IGMP filter.
Displays the specified VLAN multicast
group filtering configuration.
Adds/removes the group list filter
to/from a specified VLAN.
Enables or disables the IGMP multicast
ring network function.
Adds or deletes cascaded ports in a
multicast ring network.
ZTE Proprietary and Confidential