Zte ZXR10 2910E-PS Configuration Manual page 199

zte(cfg-router)#set ipport 0 ipaddress 169.1.15.1 255.255.0.0
zte(cfg-router)#set ipport 0 vlan 1
zte(cfg-router)#set ipport 0 enable
zte(cfg-router)#set ipport 0 dhcp relay agent
zte(cfg-router)#set ipport 0 dhcp relay server 10.230.72.2
zte(cfg-router)#set ipport 63 ipaddress 10.230.72.1 255.255.255.0
zte(cfg-router)#set ipport 63 vlan 1000
zte(cfg-router)#set ipport 63 enable
l
Configuration Verification
zte(cfg)#show dhcp relay
DHCP relay status
DHCP server mode
DHCP server retry
DHCP relay option82:
zte(cfg)#show dhcp relay option82 port 1
DHCP option82 sub-option information on port 1:
Circuit-ID: Disabled
Remote-ID: Enabled
Format: Cisco
DHCP option82 mode information on port 1: Default
zte(cfg)#show ipport 0
Status
VlanId
ArpProxy
Timeout
En/Disable: enabled
Dhcp client configuration as follows:
Class-id
Client-id
Hostname
Lease
Clear request: -
Dhcp relay configuration as follows:
Relay agent
Server IP
SJ-20120409144109-002|2012-07-02(R1.0)
: enable
: ipport
: 10
disable
: up IpAddress : 169.1.15.1
: 1 Mask
: disabled MacAddress: 00.00.00.11.22.33
: 600(s) IpMode
: -
: -
: -
: -
: enable
: 10.230.72.2
4-153
Chapter 4 Service Configuration
: 255.255.0.0
: static
ZTE Proprietary and Confidential