Zte ZXR10 2910E-PS Configuration Manual page 219

Command
zte(cfg-group)#set group tftpsvr <A.B.C.D>
show group (all configuration modes)
show group candidate (all configuration modes)
show group member [<1-255>] (all configuration modes)
zte(cfg-group)#save member {<idlist>| all}
zte(cfg-group)#erase member {<idlist>| all}
zte(cfg-group)#reboot member {<idlist>| all}
rlogin {commander | member <1-255>}(all configuration modes)
ZGMP Configuration Instance
l
Configuration Description
As shown in
configuration. Here, set the VLAN where the public network IP address of the
command switch in the cluster is located to 2525, the IP address to 100.1.1.10/24,
the gateway address to 100.1.1.1, the cluster management VLAN to 4000, the private
address pool to 192.168.1.0/24, and the IP address of the TFTP Server of the whole
cluster to 110.1.1.2.
SJ-20120409144109-002|2012-07-02(R1.0)
Figure 5-9, the initial configuration of the switches is the default
5-19
Chapter 5 Management
Function
Sets IP address of internal public
TFTP Server of cluster.
Displays cluster configuration
information.
Displays candidate switches
information.
Displays cluster member switches
information.
Saves configuration of specified
member switch.
Deletes configuration of specified
member switch.
Restarts a specified member
switch.
Remotely logs in to cluster device.
ZTE Proprietary and Confidential