Zte ZXR10 2910E-PS Configuration Manual page 103

The ZXR10 2900E series switches support four PVLAN sessions. Each PVLAN session
supports an unlimited number of promiscuous ports. Each PVLAN supports an unlimited
number of isolated or community ports.
Configuring PVLAN
The PVLAN configuration includes the following commands:
Command
zte(cfg)#set vlan pvlan session <1-4>{promise-port <portlist>|promise-tr
unk<trunklist>}{isolate-port<portlist>|isolate-trunk<trunklist>}{commu
ni-port<portlist>|communi-trunk <trunklist>}
clear vlan pvlan [session<1-4>]
show vlan pvlan [session<1-4>] (all configuration modes)
zte(cfg)#set vlan pvlan session <1-4>{promise-port <portlist>|promise-
trunk<trunklist>|isolate-port<portlist>|isolate-trunk<trunklist>|commu
ni-port <portlist>| communi-trunk <trunklist>}
PVLAN Configuration Example One
l Configuration Description
As shown in
session 1.
Figure 4-15 PVLAN CONFIGURATION EXAMPLE 1
l
Configuration Procedure
zte(cfg)#set vlan pvlan session 1 promis-port 26 isolate-port 1-3
l
Configuration Verification
zte(cfg)#show vlan pvlan
pvlan session
promis-ports
promis-trunks
isolate-ports
isolate-trunks
SJ-20120409144109-002|2012-07-02(R1.0)
Figure 4-15, add promiscuous port 26 and isolated ports 1, 2, and 3 to
: 1
: 26
:
: 1-3
:
4-57
Chapter 4 Service Configuration
Function
Sets the PVLAN function.
Clears the PVLAN configuration.
Displays PVLAN configuration.
Configuring a kind of PVLAN port.
ZTE Proprietary and Confidential