Zte ZXR10 2910E-PS Configuration Manual page 108

ZXR10 2900E Series Configuration Guide
Command
zte(cfg)#ping <A.B.C.D>[<0-65535>[<28-65535>[<1-255>[<0-65535>[<A
.B.C.D>]]]]]
zte(cfg)#trace <A.B.C.D>[max-ttl <1-255>[min-ttl <1-255>[repeat
<1-65535>[source <A.B.C.D>[timeout <1-60>[udp-port <1-65535>]]]]]]
zte(cfg-router)#set ipport <0-63>{enable | disable}
zte(cfg-router)#set ipport <0-63> ipaddress {<A.B.C.D/M>|<A.B.C.D><
A.B.C.D>}
zte(cfg-router)#set ipport <0-63> mac <HH.HH.HH.HH.HH.HH>
zte(cfg-router)#set ipport <0-63> vlan <1-4094>
zte(cfg-router)#iproute {<A.B.C.D/M>|<A.B.C.D>< A.B.C.D>}<
A.B.C.D>[<1-15>]
zte(cfg-router)#arp add <A.B.C.D><HH.HH.HH.HH.HH.HH><0-63>
zte(cfg-router)#arp delete <A.B.C.D>
zte(cfg-router)#arp ipport <0-63> timeout <1-1000>
zte(cfg-router)#arp gratuitous-send <5-4294967295>
zte(cfg-router)#clear arp
zte(cfg-router)#clear iproute [{<A.B.C.D/M>|<A.B.C.D><A.B.C.D>}<A.B.C.
D>]
zte(cfg-router)#clear ipport <0-63>[mac | ipaddress | vlan ]
zte(cfg-router)#clear gratuitous-send
zte(cfg-router)#hardware-iproute {enable | disable}
zte(cfg-router)#show arp [static | dynamic | invalid | ipport <0-63>[static |
dynamic | invalid]| ipaddress <A.B.C.D>]
show ipport [<0-63>](all configuration modes)
show iproute(all configuration modes)
show hardware-iproute (all configuration modes)
IPv4 Layer 3 Configuration Instance
l
Configuration Description
SJ-20120409144109-002|2012-07-02(R1.0)
Function
Detects the network connectivity
Router trace, which is used to determine
the path of IP data messages to access
the destination.
Enables or disables layer-3 interface.
Sets IP address and submask of layer-3
port.
Sets the MAC address of layer-3 port.
Sets the VLAN binding with layer-3 port.
Adds static route.
Adds static ARP.
Deletes static ARP.
Sets ARP entry aging time based on
layer-3 interface.
Enables the free ARP function and
sets the period for sending free ARP
messages.
Clears dynamic ARP entry in batch.
Clears static routing entry.
Deletes ipport configuration.
Disable the free ARP function.
Enables or disables the hardware
routing function.
Displays the ARP table item information
and free ARP function status according
to various rules.
Displays ipport layer-3 interface
configuration.
Displays all routing information.
Displays hardware routing
configuration.
4-62
ZTE Proprietary and Confidential