Zte ZXR10 2910E-PS Configuration Manual page 23

Zxr10 2900e series easy-maintenance secure switch
Hide thumbs Also See for ZXR10 2910E-PS:
Table of Contents

Advertisement

Chapter 2 Usage and Operation
zte(cfg-nas)#
In the NAS configuration mode, the user can configure the switch access service, including
the user access authentication and management.
To return to the global configuration mode from the NAS configuration mode, use the
command exit or press <Ctrl+Z>.
Cluster Management Configuration Mode
In the global configuration mode, use the command config group to enter the cluster
management configuration mode, as shown below:
zte(cfg)#config group
zte(cfg-group)#
In the cluster management configuration mode, you can configure the switch cluster
management service.
To return to the global configuration mode from the cluster management configuration
mode, use the command exit or press <Ctrl+Z>.
Basic Ingress ACL Configuration Mode
In the global configuration mode, use the command config ingress-acl basic number <1-99>
to enter the basic ingress ACL configuration mode, as shown below:
zte(cfg)#config ingress-acl basic number 10
zte(ingress-basic-acl)#
In the basic ingress ACL configuration mode, you can add, delete and move the rules of
basic ingress ACL with specific ACL number .
To return to the global configuration mode from basic ingress ACL configuration mode, use
the command exit or press <Ctrl+Z>.
Extended Ingress ACL Configuration Mode
In the global configuration mode, use the command config ingress-acl extend number <100
-199> to enter extended ingress ACL configuration mode, as shown below:
zte(cfg)#config ingress-acl extend number 100
zte(ingress-extend-acl)#
In the extended ingress ACL configuration mode, you can add, delete and move the rules
of extended ingress ACL with specific ACL number.
To return to the global configuration mode from extended ingress ACL configuration mode,
use the command exit or press <Ctrl+Z>.
Layer 2 Ingress ACL Configuration Mode
In the global configuration mode, use the command config ingress-acl link number <200-2
99> to enter layer-2 ingress ACL configuration mode, as shown below:
2-9
SJ-20120409144109-002|2012-07-02(R1.0)
ZTE Proprietary and Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents