Zte ZXR10 2910E-PS Configuration Manual page 211

Suppose that the IP address of the network management server is 10.40.92.77, the
switch has a layer-3 port with the IP address of 10.40.92.11, and the switch is managed
through the network management server.
Create a user named "zteuser" and the group named "ztegroup", the security level of
this group is private ( that is authentication and encryption ). Specify the IP address
of the host receiving trap or inform as 10.40.92.77, and the user is"zteuser".
l
Switch Configuration
zte(cfg)#config router
zte(cfg-router)#set ipport 1 ipaddress 10.40.92.11/24
zte(cfg-router)#set ipport 1 vlan 1
zte(cfg-router)#set ipport 1 enable
zte(cfg-router)#exit
zte(cfg)#config snmp
zte(cfg-snmp)#set group ztegroup v3 priv
zte(cfg-snmp)#set user zteuser ztegroup v3 md5-auth zte des56-priv zte
zte(cfg-snmp)#set host 10.40.92.77 inform v3 zteuser priv
zte(cfg-snmp)#show snmp group
groupName: ztegroup
secModel : v3
secLevel : AuthAndPriv
rowStatus: Active
zte(cfg-snmp)#show snmp user
UserName
GroupName
EngineID
AuthType
EncryptType: Des_Cbc
zte(cfg-snmp)#show snmp host
HostIpAddress
----------------
10.40.92.77
l
Configuration Result
When the configuration is completed, use mibbrowser software to login.
SNMP Configuration Instance3
l
Configuration Description
This example describes how to configure the MAC change advertisement function.
As shown in
through the network management server. Configure the MAC advertisement function
SJ-20120409144109-002|2012-07-02(R1.0)
: zteuser
: ztegroup(v3)
: 830900020300010289d64401
: Md5
Comm/User Version
----------- -------
zteuser Ver.3
Figure 5-6, configure SNMP first so that the switch can be managed
5-11
readView : zteView
writeView : zteView
notifyView: zteView
StorageType: NonVolatile
RowStatus : Active
type SecurityLevel
------ -------------
Inform AuthAndPriv
ZTE Proprietary and Confidential
Chapter 5 Management