SDM-300L3 Satellite Modem
Front Panel Operation
Notes:
1. For the RF ON Condition: the TX-IF shall be programmed On.
2. For RTS TX-IF, when enabled overrides CD.
This command allows for enabling or disabling of the TX carrier output depending on the
described conditions. One application for command is the operation of demand network
systems.
FUNCTION SELECT: UTILITY: MODULATOR: TX SYMBOL RATE
Status only: 4.800 to 2500 ksps. Provides symbol rate corresponding to the data rate, code
rate(s), modulation and overhead (framing) programmed into the modulator.
4.6.6.3
FUNCTION SELECT: UTILITY: DEMODULATOR
Select information to view using the [←] [→] arrow keys, then press <ENTER>.
TX SYMBOL RATE
64.000 Ksps
UTILITY
DEMODULATOR
4–92
Revision 1
MN/SDM300L3.IOM