Table of Contents
Advertisement
SDM-300L3 Satellite Modem
Front Panel Operation
Upon entry, the current TX data fault that is being monitored is displayed. Press [↑] or [↓]
to make the selection. Press [ENTER] to execute the change.
FUNCTION SELECT: CONFIGURATION: INTERFACE:
RX DATA FAULT (CONDITIONAL)
IMPORTANT
Receive data fault. Selects a receive interface fault monitor of NONE, AIS, or DATA.
The data monitored for RX data is coming from the satellite. Refer to TX DATA FAULT
for a description of function choices.
Upon entry, the current, monitored RX DATA FAULT is displayed. Press [↑] or [↓] to
make the selection. Press <ENTER> to execute the change.
FUNCTION SELECT: CONFIGURATION: INTERFACE:
TX 2047 PATTERN (CONDITIONAL)
IMPORTANT
Programs the transmitter to On or Off to insert a 2047 pattern instead of the normal
transmit data.
Upon entry, the current status is displayed. Press [↑] or [↓] to make the selection. Press
<ENTER> to execute the change.
RX DATA FAULT
Conditional: This menu is only available when the overhead interface
PCB is installed.
TX 2047 PATTERN
The is a Test Mode. Conditional: This menu is only available when the
overhead interface PCB is installed.
NONE
OFF
4–34
Revision 1
MN/SDM300L3.IOM
Advertisement
Table of Contents
