Comtech EF Data SDM-300L3 Installation And Operation Manual page 167

SDM-300L3 Satellite Modem
Front Panel Operation
FUNCTION SELECT: UTILITY: DEMODULATOR:
LNB ALARM - LOW
Status Only. Programmable within 0 to 500 mA, in 1 mA steps.
An alarm is generated whenever the LNB current falls below the programmed limit.
FUNCTION SELECT: UTILITY: DEMODULATOR:
LNB ALARM - HIGH
Status Only. Programmable within 0 to 500 mA, in 1 mA steps. An alarm is generated
whenever the LNB current exceeds the programmed limit.
Note: The low limit must be less than the high limit.
FUNCTION SELECT: UTILITY: DEMODULATOR:
RX SYMBOL RATE
Status Only. Programmable with 4.800 to 2500 ksps. Provides the symbol rate
corresponding to the data rate, code rate(s), modulation, and overhead (framing)
programmed into the demodulator.
LNB ALARM - LOW
0 mA
LNB ALARM - HIGH
500 mA
RX SYMBOL RATE
64.000 Ksps
4–99
Revision 1
MN/SDM300L3.IOM