Table of Contents
Advertisement
SDM-300L3 Satellite Modem
Front Panel Operation
Comtech EF Data-supplied code. Press <ENTER>
On entry, the current configuration code is displayed with the flashing cursor on the first
character. Press [
decrement the digit at the flashing cursor. Press <ENTER> to execute the change.
Entering this code enables the corresponding modem option. To purchase an option,
contact an Comtech EF Data marketing representative for more information
FUNCTION SELECT: MODEM TYPE:
CONFIGURATION CODE – CARD #3 (CONDITIONAL)
Comtech EF Data-supplied code. Press <ENTER>
IMPORTANT
On entry, the current configuration code is displayed with the flashing cursor on the first
character. Press [
decrement the digit at the flashing cursor. Press <ENTER> to execute the change.
Entering this code enables the corresponding modem option. To purchase an option,
contact an Comtech EF Data marketing representative for more information.
1)AAAAAAAAAA
2)AAAAAAAAAA
] or [
] to move the flashing cursor. Press [
←
→
CONFIGURATION
CODE – CARD #3
This menu appears only if the Overhead card is installed.
1)AAAAAAAAAA
2)AAAAAAAAAA
] or [
] to move the flashing cursor. Press [
←
→
4–127
Revision 1
MN/SDM300L3.IOM
] or [
] to increment or
↑
↓
] or [
] to increment or
↑
↓
Advertisement
Table of Contents
