Comtech EF Data SDM-300L3 Installation And Operation Manual page 207

SDM-300L3 Satellite Modem
Modem Types
Parameter
Modem Type
TX Data/Code Rate
TX-IF Output
RX Data/Code Rate
TX Clock Source
Buffer Clock Source
Modulator Type
Encoder Type
Demodulator type
Decoder Type
TX Overhead Type
RX Overhead Type
Interface Type
Buffer Program
RTS TX-IF Cntrl
CTS Delay
Note: To use G.703, the modem must have the required G.703 Overhead board installed.
T 5-7. EFD C
ABLE LOSED
Front Panel Setting
EFD
TX-V, QPSK 1/2
ON
RX-V, QPSK 1/2
TX Terrestrial
Satellite Clock
EFD Closed (All modulator types are
accessible)
Viterbi or Sequential
EFD Closed (All modulator types are
accessible)
Viterbi or Sequential
None
None
EIA-422, EIA-232, V.35, G.703
Note)
Bits or Milliseconds
OFF or ON
0 Seconds
N P S
ETWORK ARAMETER
Utility Modem Type
Configuration Modulator
Configuration Modulator
Configuration Demodulator
Configuration Interface
Configuration Interface
Utility Modulator
Utility Modulator
Utility Demodulator
Utility Demodulator
Utility Interface
Utility Interface
Utility Interface
(see
Utility Interface
Utility Interface
Utility Interface
5–7
Revision 1
MN/SDM300L3.IOM
ETTINGS
Reference Menu