Table of Contents
Advertisement
SDM-300L3 Satellite Modem
Front Panel Operation
FUNCTION SELECT: MONITOR:EB/NO
Displays the current E
Range: 2.0 to 16.0 dB.
Notes:
1. Low limit is based on the data rate.
2. High limit is 16.0 dB.
Press[←] or [→] to move the flashing cursor, and [↑] or [↓] to increment or decrement
the selected kbps. Press <ENTER> to execute the change.
FUNCTION SELECT: MONITOR: RECEIVE SIGNAL
Displays the current receive signal level.
Range: -135 dBm + 10 log (SR) to -85 dBm + 10log (SR)
Press[←] or [→] to move the flashing cursor, and [↑] or [↓] to increment or decrement
the selected kbps. Press <ENTER> to execute the change.
FUNCTION SELECT: MONITOR: SWEEP FREQUENCY
Displays the current offset frequency or "No Data" (if carrier is not locked).
Range: -500,000 to +500,000 Hz.
Press[←] or [→] to move the flashing cursor, and [↑] or [↓] to increment or decrement
the selected kbps. Press <ENTER> to execute the change.
EB/NO
16.0 dB
/N
or "No Data" (if carrier is not locked).
b
0
RECEIVE SIGNAL
-45.0dBm
SWEEP FREQUENCY
+
0 Hz
4–62
Revision 1
MN/SDM300L3.IOM
Advertisement
Table of Contents
