Table of Contents
Advertisement
SDM-300L3 Satellite Modem
Installation/Upgrades
2.2
Installation
The modem arrives fully assembled from the factory. After unpacking the modem, install
the modem as follows:
2.2.1
Modem Installation (Optional)
Refer to Figure 2-1. Use the following mounting kit KT/6228-1.
O
PTIONAL
QTY
2
4
2
Tools Required:
Screw Driver
5/32-inch
1. Install the IDU rear support brackets as follows:
Note: It may be necessary to adjust the location of the rear mounting rails of the rack.
: M
KIT, KT/6228-1 (M
OUNTING
Part Number
FP/6138-1
HW/10-32x1/2RK
HW/10-32X1/4 SHC
Phillips
SAE Allen Wrench
a. Install provided rear support bracket onto the mounting rail of the rack.
Fasten with provided bracket bolts.
b. Fasten the provided #10 socket head screws to the rear-side mounting
holes on either side of the chassis modem. Mount the modem into the
equipment rack ensuring that the socket heads engage into the slots of the
rear support brackets.
E
ODEM TO
QUIPMENT
Description
Bracket, Rear Support
Bolt, #10 Rack
Screw, Socket 10-32 x 1/4inch
2–2
Revision 1
MN/SDM300L3.IOM
R
)
ACK
Advertisement
Table of Contents
