Table of Contents
Advertisement
SDM-300L3 Satellite Modem
Front Panel Operation
FUNCTION SELECT: CONFIGURATION: FLEX MUX:
TX CHAN #1 MODE
TX CHANNEL 1 MODE: D&I ENABLED, T1/E1 ENABLED, or DISABLED
Normal D&I/G.703 menus are operational.
FUNCTION SELECT: CONFIGURATION: FLEX MUX:
TX CHAN #1 DATA RATE
TX CHANNEL 1 DATA RATES:
Note: DR command is not displayed if DISABLED was selected for MODE.
FUNCTION SELECT: CONFIGURATION: FLEX MUX:
TX CHAN #2 MODE
TX CHANNEL 2 MODE: ADPCM ENABLED or ADPCM DISABLED
This command enables ADPCM 32Kbps operation.
TX CHAN #1 MODE
D&I ENABLED
TX CHAN #1 DR
64.0 Kbps
TX CHAN #2 MODE
ADPCM ENABLED
4–54
1544.0 Kbps or 2048.0 Kbps for bypass
N * 64.0 Kbps for D&I
Revision 1
MN/SDM300L3.IOM
Advertisement
Table of Contents
