SDM-300L3 Satellite Modem
Specifications
14.10.12
Receive Doppler/Plesiochronous Buffer Size
The receive Doppler buffer size can be set by the operator from:
1. Bypass.
2. 32 to 262144 bits, in 16 bit steps for all data rates.
3. Selectable in ms, from 1 to 99 in 1 ms steps, for data rates < 2.6 Mbps.
4. Selectable Frame Format G.704 or None.
14.10.13
Switch Faults
•
Modulator Fault
•
Demodulator Fault
14.11
Decoding
14.11.1
BPSK Decoding
Using vector analysis of the constellation pattern, BPSK represents one symbol with the
carrier phase either at 0° or 180°. The characteristics for BPSK are provided in the
following table.
14.11.2
QPSK Decoding
The demodulator converts transmitted baseband data into a modulated QPSK carrier at the
following parameters:
4.8 kbps to 2.5 Mbps (1/2 rate)
7.2 kbps to 3.75 Mbps (3/4 rate)
8.4 kbps to 4.375 Mbps (7/8 rate)
Open collector output, 15V maximum, 20 mA maximum
current sink, fault is open circuit
Open collector output, 15V maximum, 20 mA maximum
current sink, fault is open circuit
Code Rate
Symbols/Bit
1/1
1
1/2
2
5/16
3.2
21/44
2.1
14–29
Bits/Hz
2
0.5
0.3125
0.477
Revision 0
MN/SDM300L3.IOM