Table of Contents
Advertisement
SDM-300L3 Satellite Modem
Front Panel Operation
FUNCTION SELECT: UTILITY: SYSTEM: DEMO MODE
Displays the status of the Demo Mode as either On or Off. Enables all the FAST options
for the hardware installed for 1 hour.
CAUTION
FUNCTION SELECT: UTILITY: SYSTEM: EXT AGC: MAX PWR
Sets the AGC voltage for a RX signal. The voltage range is 0.0 to 10.0V, in 0.5V steps.
Upon entry, the current external AGC voltage level is displayed. Press [↑] or [↓] to
increment or decrement the AGC voltage level in 0.5V steps. Press <ENTER> to execute
the change.
FUNCTION SELECT: UTILITY: SYSTEM: EXT AGC: MIN POWER
Sets the AGC voltage for a RX signal. The voltage range is 0.0 to 10.0V, in 0.5V steps.
Upon entry, the current external AGC voltage level is displayed. Press [↑] or [↓] to
increment or decrement the AGC voltage level in 0.5V steps. Press <ENTER> to execute
the change.
DEMO MODE
Enabling Demo mode will set all parameters to factory default values.
EXT AGC:
0.0 Volts
EXT AGC:
10.0 Volts
OFF
MAX PWR
MIN PWR
4–116
Revision 1
MN/SDM300L3.IOM
Advertisement
Table of Contents
