Table of Contents
Advertisement
SDM-300L3 Satellite Modem
Front Panel Operation
FUNCTION SELECT: CONFIGURATION: INTERFACE:
ASYNC TX STOP (CONDITIONAL)
IMPORTANT
Programs the ASYNC overhead transmit stop bits for 1 or 2.
Upon entry, the current status of the ASYNC TX stop bits is displayed. Press [↑] or [↓]
to make the selection. Press <ENTER> to execute the change.
FUNCTION SELECT: CONFIGURATION: INTERFACE:
ASYNC RX STOP (CONDITIONAL)
IMPORTANT
Programs the ASYNC overhead receive stop bits for 1 or 2.
Upon entry, the current status of the ASYNC RX stop bits makes the selection. Press
<ENTER> to execute the change.
ASYNC TX STOP
2 BITS
Conditional: The menu is only available when Modem Type = ASYNC
and requires that the Overhead Card is installed.
ASYNC RX STOP
2 BITS
Conditional: The menu is only available when Modem Type = ASYNC
and requires that the Overhead Card is installed.
4–44
Revision 1
MN/SDM300L3.IOM
Advertisement
Table of Contents
