Setting the time and date
It is important that the correct time and date are set on the machine as they are used to time
stamp the data in the contaminant, fault, and error logs, and are shown on the printed
reports. In addition, they determine the interval and synchronization of automatically initiated
PV tests.
To set the time and date
• Press Setup to display the Product
Setup menu.
V
until the Calendar option
• Press
is displayed:
e
• Press
to select it.
^
• Press
and
between the following options: Year,
Month, Day, Date, Hours, and
Minutes.
e
• Press
to edit any of the options.
^
• Press
and
option, and then press
confirm it.
C
Pressing
exits from the menu
without making any changes.
8024
V
to step
V
to adjust the
e
to
Calendar
*Year
Setting up the metal
2000
69
detector