Loma IQ2 User Manual page 117

100
Installing the metal
detector
Catalogue units only
• If mounted using the four holes located in the extension flange on the bottom of the
detector case ensure that the framework to which it is secured is capable of supporting
the weight of the unit.
Slimline units only
• If mounted using a pivot pin, ensure that the pivot pin is insulated from the detector case
and is capable of supporting the weight of the unit.
Search head metal-free area
As with heads mounted on conveyors there is both a metal-free area for moving and fixed
metal.
Metal free area for contained field models
• The metal-free area shown is for moving metal.
• Provide a 150mm metal-free area around the end plate gasket.
• The metal-free area is symmetrical about each side of the detector.
The metal-free area may be reduced, but at the possible expense of sensitivity.
9094