Pharmaceutical Versions - Loma IQ2 User Manual

18
About the metal
detector range

Pharmaceutical versions

This section describes the Loma Pharmaceutical Metal Detector, designed to detect ferrous
and non-ferrous contaminants in pharmaceutical products such as tablets, pills and
capsules.
The metal detector is mounted on an adjustable stand and consists of a search head and a
product chute. A reject assembly is fitted at the outfeed side of the head.
REJECT
45 MAX TILT
0
ASSEMBLY
On a standard Pharmaceutical Metal Detector, the control unit is mounted on the stand. A
power supply box is secured at the back of the control unit.
The product chute is constructed of low friction ABS and is fitted with a polycarbonate cover.
The cover is transparent, to allow an operator to monitor the flow of the product through the
detector. Two knurled handnuts are used to secure the chute in position.
Mounting arrangements
The stand is constructed from bead blasted stainless steel. A gas-filled strut is fitted in the
central pillar, which allows the height of the detector to be easily adjusted. Four lockable
wheels are fitted to the stand, allowing the detector to be manoeuvred easily.
The product chute, detector head, and reject assembly can be tilted to a suitable angle by
use of a quick release clamp.
CONTROL UNIT
PRODUCT
CHUTE
HEIGHT
ADJUSTMENT
CLAMP
LOCKABLE
WHEELS
POWER
SUPPLY
BOX
METAL
DETECTOR
SEARCH
HEAD
TILT ANGLE
ADJUSTMENT
CLAMP
5091