44
Setting up a new
product
To set up a new product
• Press
• Press
• Press
• Press
• Press
V
to display the Flow
length option.
This option allows you to enter the
length of the pack to flow allowing for
any skew.
V
to display the Rej delay
option.
This determines the delay, in
seconds, between the detector head,
or photo-eye if fitted, and the
operation of the reject device.
V
to display the Rej dwell
option.
This determines the time for which
the reject device operates.
V
to move to the next entry.
This display will be shown if PV test
is set to YES in the User Options
menu.
e
to select the PV test
setup menu.
This contains five system dependent
entries and four product dependent
entries. To use the PV test all the
entries must be completed. For more
information see Setting up PV
testing, page 75.
(Continued)
*Flow length
*Rej delay
*Rej dwell
PV test setup
255 mm
0.490 s
0.250 s
7031