Loma IQ2 User Manual page 96

To run a performance validation
test
r
to display the Results
• Press
menu.
V
arrow until the Run PV
• Press
test option is displayed.
e
• Press to confirm that you want
to run the PV test.
The following Operator prompt will
be displayed:
e
• Press to edit the prompt and
then enter the operator ID in the usual
way; see To edit a text field, page 39.
The test will then prompt the operator
for the size of the first type of test
wand specified in the PV test setup
menu:
It will then perform the first pass of PV
testing.
If no test sample sizes have been
programmed then the display will
show + No Samples+ and a report
will be produced immediately.
8024
Run PV test
*Operator id
Use 0.80 mm FE
Pass 1 sig
Using Performance
?
___
13
79
Validation