Loma IQ2 User Manual page 145

128
Maintenance
FLOW
PISTON ASSEMBLY
DIVERT VALVE
• Check that the fitted 'O'-rings and the split bushing are in good condition. Replace as
necessary.
• Screw the piston onto the actuator.
• Replace the lower valve body and clamp the upper and lower valve bodies together.
Replacing the actuator bushing/packing
Pipeline versions
• Remove the end cap from the actuator by unscrewing the four screws, separate the clear
stem protector from the end cap and replace the end cap.
O RING SEAL
ACTUATOR
DIVERT VALVE
REJECT
10087