Table of Contents
Advertisement
Operating Instructions
Setting the Time and Date
It is important that the correct time and date are set on the machine as they are used to time stamp
the data in the contaminant, fault and error logs and are shown on the reports. In addition they
determine the interval and synchronisation of automatically initiated PV tests.
To change the time and date, proceed as follows:
1.
Tap on the control panel area
is displayed.
2.
Tap on the Display icon to show the Display screen.
3.
Then tap on the Calendar icon to display the Calendar screen.
4.
Tap in the date fields and select the month from the drop down list Then tap in each of the
time fields to set the required time.
168
in the
System Setup
screen. The
System Settings
screen
Advertisement
Table of Contents
