Setting The Working Mode - Loma IQ2 User Manual

64
Setting up the metal
detector
To set the working mode
• Select the Manual setup menu as
• Press
• Press
• Press
• Press

Setting the working mode

The metal detector operates in one of three alternative modes to give the best results with
different types of product.
DRY mode is used for products with no product effect.
RESIST mode is used for products that exhibit some product effect, such as cocoa, iron
fortified cereals, flour, etc, or that contain some moisture.
REACT mode is used for products that are conductive; ie with a significant water content
such as cheese or meat, or products wrapped in metalised film.
For more information refer to Principles of operation, page 28.
Normally this setting is automatically set during calibration, but you can set it manually and
optionally lock it so that it does not get altered during subsequent calibration.
described above.
V
to display the Working
e
mode option, and press
it.
^ V
or to step between
the three options DRY, RESIST, and
REACT.
V
to display the Working
e
option and press to edit it.
^ V
or to switch
between LOCK and UNLOCK.
*Working mode DRY
to edit
*Working
This allows you to lock the working mode
setting so it is not automatically set during a
calibration procedure.
LOCK
8024