Linker Versions - Loma IQ2 User Manual

14
About the metal
detector range
Fittings
Materials
Product pipe seals
NOTE: Working product pressures may be limited depending upon the overall line
configuration including any automatic reject device if fitted.

Linker versions

The basic 2.5" pipeline detector can be configured for use with a handlinker application.
The system has additional hinges and an extension drive shaft fitted to facilitate the use of
handlinker equipment. The metal detector locates on the filler output hinge in place of the
normal gearbox drive. The product pipe engages the filler output via 1/4 turn RD80 fittings.
The gearbox and handlinker equipment is fitted to the replica hinge on the output of the
metal detector. The reject system employed is stop on detect.
The same pipeline detector can also be configured for use with AL systems. This system is
mounted from the filler hinge and includes the fitting of an input swivel RD80 x 1/4 turn
product pipe connector that allows adjustment for uneven heights between the filler and AL
Linker.
A further configuration called the short hinge allows the use of the 1/4 turn RD80 fittings and
an automatic reject valve if required.
Available with RD80 x 1/4 DIN11851 3A bevel and Quick
Release fittings.
Acetal/Delrin viton
5091