Pipeline Versions - Loma IQ2 User Manual

Pipeline versions

This section describes Loma Pipeline Metal Detectors, which are designed to be used with
pumped products such as meats, liquids, emulsions, slurries and pastes. They can interface
with a wide range of meat pumps and clipping machines.
Model shown is a 2.5" on a stand with a reject valve
LAMP
OPTIONAL
ELECTRICAL
CONNECTION
AIR CONNECTION 10mm
PRESSURE 6 bar
The Pipeline Metal Detector is of stainless steel construction and consists of a pipeline
detector assembly and a control unit. An automatic reject valve can optionally be fitted. The
pipeline detector assembly consists of a pipeline body, which contains a removable Acetal
product pipe, and a search head.
A water jacket may be fitted, if the detector is to be used for products liable to solidify or smear.
Pipeline detectors may be mounted in either a horizontal or downward flowing section of the
pipeline. Upward flowing sections are not suitable as reject timing becomes unpredictable
due to the effect of gravity on the contaminant.
5091
CONTROL REJECT
UNIT VALVE ARV60
RD80 x 1/4"
FEMALE
FLOW
DETECTOR
100 X 100
RD80 x 1/4"
MALE
REJECT
9
About the metal
detector range