Loma IQ2 User Manual page 124

Connecting the air supply
NOTE: An air supply at a pressure of between 3.5 bar (52psi) and 4.5 bar (66psi) is required
to operated the reject device. The air supply must be dry and lubricated.
• Connect the compressed air supply to the input side of the air regulator unit via 10mm
outside diameter pipe. This unit is located on the right-hand side of the system framework
when facing the detector controls. The air pressure is set at 4.0 bar (60psi) using the
control situated on the top of the water trap bottle.
AIR
INPUT
WATER
DRAIN
9094
PRESSURE
ADJUSTMENT
GUARD
INTERLOCK
107
Installing the metal
detector