General Information - Loma IQ2 User Manual

82
Installing the metal
detector

General information

The following information applies to all versions of the metal detector.
For a description of each version of the metal detector range see the chapter About the
metal detector range, page 1.
Warnings
The following safety warnings apply to the procedures for all versions:
1. LETHAL HAZARD – ELECTRICAL SUPPLIES
2. LETHAL HAZARD – COMPRESSED AIR SUPPLIES
3. WORKING ON EQUIPMENT
4. REJECT DEVICES
6. HEAVY EQUIPMENT
7. LIFTING EQUIPMENT
8. MOVING METAL DETECTORS
9. CONTAMINANTS
For details see Safety warnings, page iii.
The following emergency procedures apply to these procedures:
2. DEALING WITH FIRE.
For details see Emergency procedures, page viii.
Space required for installation and maintenance
It is important that sufficient free space is left at the front and back of a metal detector to
enable commissioning and maintenance personnel to easily gain access to components. It is
recommended that wherever possible a minimum of 1 metre free space is available at the
front of the machine and 1 metre at the rear.
9094