Adjusting The Threshold And Compensation - Loma IQ2 User Manual

66
Setting up the metal
detector
To set the trigger threshold
• Press
• Press
To adjust the threshold
• Press
V
to display the current
trigger threshold and press
edit it.
This option will only appear if the
Calib trigger option has been set to
On in the User Options menu.
^ V
or to increase or
decrease the trigger threshold, and
e
press to confirm it.

Adjusting the threshold and compensation

These values are normally automatically set up during calibration and should not normally
require adjustment.
While either value is being adjusted the Calibrate indicator will be illuminated.
NOTE: Any manual settings will be lost the next time a calibration is performed.
V
until the Threshold
option is displayed and press
select it.
The display shows the threshold and
signal and allows you to edit the
threshold.
*Trig thresh
e
to
e
to
1000
Threshold
8024