Loma IQ2 User Manual page 70

To specify which report to
produce (Continued)
V
until the Report options
• Press
menu is displayed and press
select it.
If this option does not appear on the
Setup menu check that you have
turned on the link in the Serial Link
submenu of the Service menu.
The Form feed option is displayed.
Set this to YES to print a form feed at
the end of each report or NO to print
the reports without breaks.
V
to display the All reports
• Press
option.
Set All reports to YES to enable all
the reports. Alternatively, setting the
option to NO displays a menu option
for each report allowing you to
individually specify which report to
print.
To specify the batch
statistics
If All reports has been set to YES or
Batch reports has been set to YES in
the Report Options menu (Setup
menu), three additional menu options
allow you to setup the batch
statistics.
7031
Report options
e
to
*Form feed
*All reports
*Batch reports
Displaying and
printing reports
NO
NO
YES
53