Adjusting The Head Power - Loma IQ2 User Manual

68
Setting up the metal
detector
To adjust the head power
• Select the Manual setup menu.
• Press
• Press
To lock the head power
• Press
• Press

Adjusting the head power

The head power is set automatically during full calibration and should not normally need
adjustment. However, you have the option of adjusting the head power manually, and locking
the adjustment so that it will not be changed during calibration.
V
until the current head
power setting is displayed:
e
to edit it, press
V
to increase or decrease the
head power respectively, and press
e
to confirm it.
V
to display Head.
e
to edit it, press
V
to switch between LOCKED
and UNLOCKED, and press
confirm it.
*Head power
^
The head power can be adjusted to the
or
values Min (least sensitive), 1, 2, 3, 4, 5, 6, 7,
or Max (most sensitive).
*Head
^
Locking the headpower prevents it from
or
being set automatically during a subsequent
e
calibration.
to
MAX
LOCKED
8024