Loma IQ2 User Manual page 71

54
Displaying and
printing reports
To specify the batch
statistics
• Press
• Select TIME for the batch interval to
• Press
• Press
If batch units are set to PACK:
• Press
packs option.
(Continued)
V
to display the Batch
units option.
be specified by time, or PACK for the
batch interval to be specified by the
number of packs.
If you specify the batch units as time:
V
to specify the batch start.
To ignore the start time set batch
start to 00.00.
V
to display the Batch
length option and specify the batch
length in hours.
V
to display the Batch
*Batch units
The Batch interval can only be specified in
terms of the number of packs if a photo-eye
is fitted; otherwise this menu option is not
displayed.
*Batch start
This option allows you to synchronize the
start of each batch to a particular time of
day. For example, if hourly batch statistics
are required starting from 6.30 pm set the
batch length to one hour and the batch start
to 18.30.
*Batch length
*Batch packs
This can be set to a number between 0 and
9999 to specify the batch pack interval.
TIME
00.00
01.00
1000
7031