Configuring Switch Security; Acl Configuration - Motorola WS5100 Series Migration Giude

4-6 WS5100 Series Switch Migration Guide
Table 4.6 VLAN Configuration (Continued)
Configuration
Option/Feature
Adding a New
VLAN ID
Removing a VLAN
or removing a
VLAN/WLAN
Assignment

4.1.5 Configuring Switch Security

4.1.5.1 ACL Configuration

This section describes the differences in menu path navigation amongst the WS5100 1.4.x, 2.x and 3.0
baselines when accessing the switch Access Control List (ACL).
Table 4.7 ACL Configuration
Configuration
Option/Feature
Creating an ACL
1.4.x Location
Create > Ethernet > New
Policy
--------------------------------------
• Enter a name and
description for the policy.
• Click Next.
• Click Add.
Create > Ethernet > New
Policy
--------------------------------------
• Enter a name and
description for the policy.
• Click Next.
• Select a target VLAN.
• Click Remove.
1.4.x Location
Create >
Access Port >
Access Control List >
2.x Location
Create > Ethernet > New
Policy
--------------------------------------
• Enter a name and
description for the policy.
• Click Next.
• Click Add.
Create > Ethernet > New
Policy
--------------------------------------
• Enter a name and
description for the policy.
• Click Next.
• Select a target VLAN.
• Click Remove.
2.x Location
Create >
Access Port >
Access Control List
3.0 Location
Network >
Wireless LANs
---------------------------------
• Click the Configuration
tab.
• Click the Add button.
• Select the VLAN ID
checkbox.
• Assign a new VLAN ID.
Network >
Layer 2 Virtual LANs
--------------------------------------
• Select the VLAN
Assignment tab.
• Remove the VLAN
assignment checkmarks as
required to remove the
WLAN/VLAN assignment.
3.0 Location
Security >
ACLs
--------------------------------------
Configuration
• Click the
tab.
Add
• Click the button.