datapattern
SYNTAX
DEFAULT VALUE
DESCRIPTION
EXAMPLE
RELATED
license
SYNTAX
DEFAULT VALUE
DESCRIPTION
TrangoLINK Apex™ 18 User Manual Rev. 1.0
datapattern <external | internal>
external
Sets datasource for the modem.
datapattern can be generated from external source or the
internal data
The datapattern should be set to "external" during normal
mode of operation, otherwise no user data from GigE or
the T1 ports will be transmitted.
To set data pattern source:
(trango-config)# datapattern external
Data pattern: External
SUCCESS
(trango-config)# datapattern
Data pattern: External
Loopback, ber
License <key#> <key>
Key# is 1 | 2
1 for Speed upto 200Mbps
2 for MAX speed
Key: 20byte hex string
No key, Preconfigured for speed < 107Mbps
License key command is used to set the license required
Section: Appendix A - Command Set Summary
Page 93