Show; Snmpd - Trango Systems TrangoLINK APEX 18 User Manual

RELATED

show

SYNTAX
DEFAULT VALUE
DESCRIPTION
EXAMPLE
RELATED

snmpd

SYNTAX
DEFAULT VALUE
DESCRIPTION
EXAMPLE
RELATED
TrangoLINK Apex™ 18 User Manual Rev. 1.0
SUCCESS
ibm
show <passwords>
N/A
Show passwords command is used to view the currently
configured passwords for different applications/nodes.
To display the currently configured passwords on the
system
(trango-config)# show passwords
CLI View node: trango
CLI Config node: trango
SNMP Read community:
SNMP Write community: private
Web interface: trango
snmp trap: trapstr
Passwd
snmpd <on | off>
ON
Turn on/off snmpd agent on the radio. Must be on to
perform any SNMP get/set.
To turn snmpd off
(trango-config)# snmpd off
snmpd: off
SUCCESS
Ipconfig, snmptrap, trapip
Section: Appendix A - Command Set Summary
public
Page 104